Humidification
Electric
| Products | Descriptions | Documents |
|---|---|---|
Expresspack® |
ExpressPack® is a prefabricated multitube steam dispersion system, allowing atmospheric dry steam diffusion into a duct or air handling unit.This system consists of ideally positioned tubes, which provide a reduced steam absorption distance, while... | |
ELMC |
When the unit goes on, the inlet valve opens and cylinder fills of water. Water enters the bottom of the boiler and rises until it reaches the high level electrode. The electric current, by applying power to electrodes immersed in water, heats the... | |
Kit MC OEM |
When the unit goes on, the inlet valve opens and cylinder fills of water. Water enters the bottom of the boiler and rises until it reaches the high level electrode. The electric current, by applying power to electrodes immersed in water, heats the... | |
RTH and RTH LC Series |
When power is supplied to the unit, the water fill valve opens and it enters the tank until the high-water switch is reached. The humidifier then produces steam in response to the humidistat's input signal. Steam output is continuously adjusted to... | |
Humidiclean HC6000 |
When power is supplied to the unit, the water fill valve opens and it enters the tank. Once the level reaches the low-water switch, the heating elements are energized (assuming there's a call for steam output). The unit continues to fill until the... |
Atomizing
| Products | Descriptions | Documents |
|---|---|---|
BUS Nozzles |
The Ultrasonic Nozzle uses compressed air to atomize water by directing a high velocity stream of water particles at a target. The force of impact causes the target to resonate or vibrate at ultrasonic speeds, this action breaks up the water... | |
BV Nozzles |
The Venturi Nozzle uses compressed air to atomize water into a fine stream of particles which are quickly absorbed by the air. As the compressed air is ejected through the nozzle venturi, a vacuum is created which constantly draws water upfrom a... | |
Centrifugal Atomizer AC4 |
Atomisation system which transforms water into very fine mist rapidly absorbed by air with cooling and humidfying effect |
Live Steam
| Products | Descriptions | Documents |
|---|---|---|
Armstrong Series 9000 |
Steam systems provide generally a saturated vapour which can generate condensate by heat exchange.It is thus necessary to obtain a technique of humidification guaranteeing a perfectly dry steam before the injection. It is in this objective that the... | |
Armstrong Series 1000 |
Steam separator-type humidifier for use in sensitive environments.Clean steam is generated with pure demineralised, deionized or distilled water. All wetted parts of the humidifier package are stainless steel. | |
Armstrong Series FSA Unit humidifiers for area humidification |
The steam is initially put through an in-line strainer to remove larger solid particles and then fed into the separator chamber. This section contains two baffles which reduce the speed of the steam (then the noise) and reverse its flow in order to... | |
Humidipack |
The ARMSTRONG HumidiPack is a pre-fabricated steam humidifier system that is ready for insertion into the duct. The HumidiPack consists of a separator/header and welded stainless steel multiple tube dispersion assembly which substantially reduces... |
Steam Bath
| Products | Descriptions | Documents |
|---|---|---|
ElectroVap MC |
When the unit goes on, the inlet valve opens and cylinder fills of water. Water enters the bottom of the boiler and rises until it reaches the high level electrode. The electric current, by applying power to electrodes immersed in water, heats the... |
Adiabatique
| Products | Descriptions | Documents |
|---|---|---|
Evaporative Pad Adiabatic |
The EvaPack™ Series efficiently converts water to water vapor using an adiabatic process. Dry air passes through a corrugated bank of wetted cells media made from nonorganic wet fibers. EvaPack™ series uses the sensible air heat to evaporate the... |